Header 1a Header 1b Header 1c Header 1c
Header Middle 1a Header Middle 1b Header Middle 1c
Top Navi
celah
celah
celah
Navy Bottom

Bullet Bullet Bullet
Bullet Vertical Turbine
Bullet Lineshaft, Submersible
 
Bullet GFC Vertical Inline Pumps
Bullet  
Bullet Goulds GIS Series - ISO End Suction Pumps
Bullet  
Bullet GSC Horizontal Split Case Pumps
Bullet  
 
 

Server Facility & Design:
IRFA Media WWW Promotion
PRODUCTS 
Pumps Projects
Pumps For Industry
blank blank blank
   
 
 
 
 
 
 SUBMERSIBLE

Applications


Goulds Pumps combines the hydraulic engineering of turbine
pumps matched to the hi-tech design of electric submersible
motors.

Features

  • Discharge Pipe
    Properly sized for optimum watervelocities to insure peak hydraulic performance.

  • Discharge Bowl
    Several discharge sizes available for NPT or flanged pipe.

  • Discharge Bearing
    Extra long top protected bronze bearing insures positive
    shaft alignment and stabilization for extended life.

  • Intermediate Bowl
    Close grained Class 30 cast iron. Water passage glassed for maximum efficiency and abrasion resistance.

  • Impellers
    Designed for maximum efficiency with wide range hydraulic coverage. Precision balanced for smooth operation.

  • Upthrust Collar
    Designed for extra margin of safety against possible momentary upthrust occurring at startup.

  • Intermediate Bowl Bearings
    Reliable long life bronze or rubber bearing.

  • Lock Collets
    Accurately machined to insure positive locking of impeller to pump shaft.

  • Pump Shaft
    100,000 PSI high tensile stainless steel provides strength and excellent corrosion resistance. Ground and polished for smooth bearing surface.

  • Suction Inlet
    Contoured for smooth flow entrance. Protected by an oversized stainless steel strainer to prevent entrance of damaging solids.

  • Suction Adapter
    Ductile iron provides for increased strength and positive motor alignment. Open area permits easy access to pump/motor coupling.

  • Pump/Motor Coupling
    Large stainless steel coupling accurately machined for perfect alignment, balance and power transmission. Submersible pumps and motors provide an extensive list of options versus other deep well pumping equipment systems. Advanced engineering designs and experience now assure units for long term pumping service. Water well applications provide the perfect opportunity to evaluate features and benefits of submersible equipment.




Hermetically Sealed Type

A Hermetically Sealed Type motor utilizes windings of standard construction and insulation thickness. The windings are encased and Hermetically Sealed within the external shell casing on the outside and an internal tube or liner inside the bore. The Hermetically Sealed enclosure eliminates the possibility of water leakage into the winding the liquid medium circulates between the rotor and stator liner providing lubrication and cooling to the bearings.



Submersible Option

Goulds Pumps can provide several options in pump and motor combinations to meet the exacting conditions of your applications:
  • High temperature wells
  • High horsepower, limited well diameters
  • Motor sensing devices
  • Water level indicators
  • Special materials
  • Special voltage motors
Consult Goulds Pumps Turbine Customer Service Dept. for details.
Wet Winding Type

A Wet Winding Type motor is one in which the motor windings are in direct contact with a liquid medium. The medium is clean, clear water. A pressure balancing system prevents exchange of the motor liquid medium and well water due to thermal expansion and contraction when the motor is operating. The liquid medium fills the inside of the motor and surrounds both the stator windings and the rotor. A completely water proof insulation is used on the magnet wire used for the stator windings. The liquid medium inside the motor air gap and coils acts as a heat transfer device by circulating through the windings and transferring heat to the external casing. Dissipation of this heat occurs as the well water flows at a required velocity over the external case. As is the case in all submersible type motors, the internal liquid medium is also used for bearing lubrication.
Submersible Accessories

  • Valves
    � Check Valves
    � Flow Control
    � Gate Valves
    � Ball Valves
  • Electrical Panels
    � Furnas Panels
    � V.F.D. Drivers
  • Pitless Adapters
  • Wire
    � 12 to 0000
  • Heat Shrinks
  • Splice Kits
  • Tanks
  • Well Heads
    � Submersible Discharge Head
  • Torque Arrestors
  • Gauges
  • Motor Shrouds
 

 

 

 



 

 
     
 
Blank
Blank
Copyright © 2002 - PT. MULTI SINDOMULYA - ALLRIGHT RESERVED
Last Update: September 2010
Best view at: 800 x 600 dpi resolution