|
|
PRODUCTS
   |
 |
|
|
|
|
|
|
|
|
|
 |
 |
|
|
| |
|
| |
 |
| |
Performance range:
- Capacities up to 340m3/h (1500 USgpm)
- Head up to 500m (1640 feet)
- Max. speed up to 3600 min-1 (3600 rpm)
Multistage pumps for capacities up to 2.000 m3/h (8800 USgpm),
available - Series P refer to, catalogue 2300.1.B.
Sizes:
DN 40 up to DN 125 (from 1 1/2� to 5�)
discharge
Max. temperature:
140oC (280oF)
Max. casing pressure:
55 bar (800 psig)
For more detailed information about operation limits with regard to
material of construction and operating conditions please refer to
data sheets or actual quotations.
Handled liquids:
Pure as well as slightly contaminated media
such as:
- cold and hot water
- condensate
- oil suspensions
- acids as well as their watery solutions
- caustic solutions
- brine
Applications:
- water supply
- booster systems
- irrigation
- fire fighting
- snow making
- cooling circuits
- boiler feed
- condensate
- district heating
- osmosis and ultra filtration
- spray water systems
- cleaning systems
- mining
|
| |
VOGEL Multistage pumps utilize a modular design concept which maximizes component
interchangeability. As such, multiple design configurations can be engineered to meet customer
requirements without compromise to repair part inventories.
Modular system:
The entire performance range is covered by 4 mechanical sizes that hold 8 different hydraulics.
Size |
Discharge branch
DNd [mm] |
Suction branch
DNs [mm] |
Hydraulics |
Capacity
Q [m³/h] |
| 50 Hz |
60 Hz |
|
MP 40 |
40 |
65 |
|
|
MP 65 |
65 |
100 |
|
|
MP 100 |
100 |
125 |
|
|
MP 125 |
125 |
150 |
|
|
Hydraulics:
Closed radial type impellers designed for casing wear rings on both sides. Axial thrust is minimized
by balance holes for minimum bearing loads and maximum bearing lifetime.
Diffusers separated from stage casings, easily exchangeable. Balanced radial forces, minimum shaft
deflection, minimum vibrations.
|
 |
|
|
Design Versions:
Type MP:
Horizontal shaft with bearings at both ends,
drive-end at discharge side (standard),
rotation clockwise, with suction branch left
and discharge branch radially upwards, grease
lubrication. Counter clockwise rotation and
other flange orientations available as an
option.
Type MPA:
Endsuction type, discharge branch radially
upwards. Drive end at discharge side. Thrust
bearing at drive side, grease lubrication,
medium lubricated slide bearing between first
and second stage. Inducer design available for
low NPSH applications.
Type MPB:
Vertical close coupled design using standard
IEC motors up to 90 kW. The pump shaft is
directly coupled to the motor shaft.
Type MPV:
Vertical design with separate thrust bearing
and flexible coupling between motor and
pump shaft. Standard IEC motors for 90 kW
and larger.
Type MPVS:
Vertical wet pit configuration lengths:
at 2950/3550 r.p.m.: max. 4 m
at 1450/1750 r.p.m.: max.10 m
Inducer design available.
|
| |
|
|
| |
|
 |
| |
|
|
| |
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
